- Thingiverse: https://www.thingiverse.com/thing:6482799
- Supports: Designed to be printed without supports or rafts.
- Material: PLA used. Any acceptable. Resin would be excellent!
- Print Time: Average 3-4hrs per case at 60mm/s. Top pieces will run 1-2hrs depending on infill settings.
This is my custom designed modular Raspberry Pi cluster system. It comes in three components, a dual space 2.5" HDD/SSD bay (optional), the case itself with space for a 30mm fan, and a top cover with logo embedded into the case.
Due to its design nature, one can print a large number of these cases and slide together as many as needed. I recommend using these cases in conjunction with ARM based Proxmox ports to create a web-managable VM cluster.
In the future, it is my intention to design a module these cases can slide onto with support for a 5 / 8 port network switch. Another module, which will be sized the same as the swich module, will be a quad space 3.5" HDD bay for NAS systems to be considered with this design.